|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) STB55NF03L N-CHANNEL 30V - 0.01 - 55A D2PAK STripFETTM POWER MOSFET T YPE STB55NF03L s s V DSS 30 V R DS(on) < 0.013 ID 55 A s s TYPICAL RDS(on) = 0.01 OPTIMIMIZED FOR HIGH SWITCHING OPERATIONS LOW GATE CHARGE LOGIC LEVEL GATE DRIVE 3 1 DESCRIPTION This Power Mosfet is the latest development of STMicroelectronics unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. APPLICATIONS s LOW VOLTAGE DC-DC CONVERTERS s HIGH CURRENT, HIGH SPEED SWITCHING s HIGH EFFICIENCY SWITCHING CIRCUITS D2PAK TO-263 ADD SUFFIX "T4" FOR ORDERING IN TAPE & REEL INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DS V DGR V GS ID ID I DM (*) P tot Ts tg Tj Parameter Drain-source Voltage (VGS = 0) Drain- gate Voltage (R GS = 20 k) G ate-source Voltage Drain Current (continuous) at Tc = 25 C Drain Current (continuous) at Tc = 100 C Drain Current (pulsed) T otal Dissipation at Tc = 25 C Derating Factor Storage Temperature Max. Operating Junction Temperature o o o Value 30 30 20 55 39 220 80 0.53 -65 to 175 175 Un it V V V A A A W W /o C o o C C (*) Pulse width limited by safe operating area 10/01/2000 1/8 STB55NF03L THERMAL DATA R thj -case R thj -amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature F or Soldering Purpose 1.875 62.5 300 o o C/W C/W o C ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbo l V (BR)DSS I DSS IGSS Parameter Drain-source Breakdown Voltage Test Con ditions I D = 250 A V GS = 0 Min. 30 1 10 100 Typ. Max. Unit V A A nA V DS = Max Rating Zero Gate Voltage Drain Current (V GS = 0) V DS = Max Rating Gate-body Leakage Current (VDS = 0) V GS = 20 V T c =125 oC ON () Symbo l V GS(th) R DS(on) I D(o n) Parameter Gate Threshold Voltage V DS = V GS Static Drain-source On Resistance On State Drain Current V GS = 10V V GS = 4.5V Test Con ditions ID = 250 A ID = 27.5 A ID = 27.5 A 55 Min. 1 0.01 0.015 Typ. Max. 2.5 0.013 0.021 Unit V A V DS > ID(o n) x R DS(on )ma x V GS = 10 V DYNAMIC Symbo l g f s () C iss C os s C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Con ditions V DS > ID(o n) x R DS(on )ma x V DS = 25 V f = 1 MHz I D =27.5 A V GS = 0 Min. Typ. 40 1450 390 150 Max. Unit S pF pF pF 2/8 STB55NF03L ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbo l t d(on) tr Qg Q gs Q gd Parameter Turn-on Delay T ime Rise Time Total G ate Charge Gate-Source Charge Gate-Drain Charge Test Con ditions V DD = 15 V I D = 27.5 A R G = 4.7 V GS = 4.5 V (Resistive Load, see fig. 3) V DD = 24 V ID = 55 A V GS = 4.5 V Min. Typ. 25 280 25 11 12 35 Max. Unit ns ns nC nC nC SWITCHING OFF Symbo l t d(of f) tf Parameter Turn-off Delay T ime Fall T ime Test Con ditions V DD = 15 V I D = 27.5 A V GS = 4.5 V R G = 4.7 (Resistive Load, see fig. 3) Min. Typ. 40 60 Max. Unit ns ns SOURCE DRAIN DIODE Symbo l ISD I SDM (*) V SD () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 55 A V GS = 0 45 52 2.3 I SD = 55 A di/dt = 100 A/s T j = 150 o C V DD = 15 V (see test circuit, fig. 5) Test Con ditions Min. Typ. Max. 55 220 1.3 Unit A A V ns nC A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Area Thermal Impedance 3/8 STB55NF03L Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 4/8 STB55NF03L Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Source-drain Diode Forward Characteristics 5/8 STB55NF03L Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/8 STB55NF03L TO-263 (D2PAK) MECHANICAL DATA mm MIN. A A1 B B2 C C2 D E G L L2 L3 4.4 2.49 0.7 1.14 0.45 1.21 8.95 10 4.88 15 1.27 1.4 TYP. MAX. 4.6 2.69 0.93 1.7 0.6 1.36 9.35 10.4 5.28 15.85 1.4 1.75 MIN. 0.173 0.098 0.027 0.044 0.017 0.047 0.352 0.393 0.192 0.590 0.050 0.055 inch TYP. MAX. 0.181 0.106 0.036 0.067 0.023 0.053 0.368 0.409 0.208 0.624 0.055 0.068 DIM. D A C A2 DETAIL "A" A1 B2 B G C2 DETAIL"A" E L2 L L3 P011P6/E 7/8 STB55NF03L Information furnished is believed to be accurate and reliable. However, STMicroelect onics assumes no responsibil ity for the consequences r of use of such information nor for any infringement of patents or other rights of third partes which may result from its use. No license is i granted by implication or otherwise under any patent or patent rights of STMicroelectro nics. Specific ation mentioned in this publication are subjec t to change without notice. This publication supersedes and replaces all informaton previously supplied. STMicroelectronics products i are not authorized for use as critical components in life support devices or systems with express written approval of STMicroelectronics. out The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japa - Malaysia - Malta - Morocco n Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. 8/8 http://www.st.com . |
Price & Availability of STB55NF03L |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |